Tube Flaring & Swaging Tools
Available80 products
Tube flaring and swaging tools widen the ends of tubing to make connections in plumbing, HVAC, and automotive applications. They apply pressure to reshape copper and other soft metal tubing while maintaining its strength since there's no loss of material. Flaring and swaging tools are commonly used on air, brake, and water lines.
Handheld Tube Flaring Tools
Handheld flaring tools are gripped with one hand while turning their flaring cone handle with the other hand. They have multiple slots that hold tubing of different sizes and clamp it in place as the flaring cone presses into the end of the tube. Flaring tools create a funnel-shaped end (flare) that forms a tight joint with a flared tube fitting, eliminating the need for brazing or soldering. The flare height is adjusted by moving the tubing up or down in the slot before flaring. Tube flaring tools are commonly used to connect refrigerant tubing in mini-split systems.
Eccentric Cone Type
| Loading... | ||||||
Faceted Cone Type
| Loading... | ||||||
Roller Cone Type
| Loading... | ||||||
Swivel Cone Type
| Loading... | ||||||
Flaring & Swaging Tool Kits
Flaring and swaging kits include a hand-operated tool with attachments to flare and swage tubing. Flaring creates a funnel-shaped end (flare) that forms a tight joint with a flared tube fitting, eliminating the need for brazing or soldering. Flares are commonly used to connect refrigerant tubing on mini-split line sets. Swaging enlarges the end of a tube so it slides over tubing of the same diameter to join two lengths without using fittings. The connection is then brazed to form a permanent joint.
Single 45 Degree Flare Type
| Loading... | ||||||
Hammer-Driven Tube Flaring Tools
Hammer-driven flaring tools are struck on their shank to form flares more quickly but less precisely than hand-turn tools. These punch-style tools center their nose in tubing to create a 45° flare with uniform edges and a set height. Flaring tools create a funnel-shaped end (flare) that forms a tight joint with a flared tube fitting, eliminating the need for brazing or soldering. They are commonly used to connect refrigerant tubing in mini-split systems.
| Loading... | ||||||
Flaring Tool Adapters & Accessories
Flaring adapters and accessories attach to compatible flaring tools so they can form different types of flares on the end of tubing.
| Loading... | ||||
Hammer-Driven Tube Swaging Tools
Hammer-driven swaging tools are struck on their shank to thrust their tapered shaft into the end of tubing to widen it. These punch-style swagers enlarge the tube so it slides over another tube of the same diameter. The two lengths of tubing connect without using fittings, and the connection is then brazed to form a permanent joint.
| Loading... | ||||
Hammer-Driven Tube Swaging Tool Kits
Swaging kits include multiple punch-style tools to swage different tubing sizes. The tools are struck on their shank with a hammer to drive in their tapered shaft and widen the end of tubing. They enlarge the tube so it can slide onto another tube of the same diameter. The two lengths of tubing connect without using fittings, and the connection is then brazed to form a permanent joint.
| Loading... | ||||
Tube Expander Kits
These kits include an expander tool with multiple, interchangeable heads for different tubing diameters. The heads fit into the end of tubing and open out as the tool handles are squeezed, enlarging the tube so it can slide onto another tube of the same diameter. The two lengths of tubing connect without using fittings, and the connection is then brazed to form a permanent joint.
3 Heads Included
| Loading... | |||||
4 Heads Included
| Loading... | |||||
6 Heads Included
| Loading... | |||||
9 Heads Included
| Loading... | |||||
Swaging Adapters & Accessories
Swaging adapters and accessories attach to compatible swaging tools so they can create different diameters on the end of tubing.
| Loading... | ||||
Flaring Tool Kits
Flaring kits include a hand-operated tool with attachments to create different types of flares in a range of tubing sizes. Flaring creates a funnel-shaped end (flare) that forms a tight joint with a flared tube fitting, eliminating the need for brazing or soldering. Flares are commonly used to connect refrigerant tubing on mini-split line sets.
| Loading... | ||||||
Replacement Parts for Tube Flaring & Swaging Tools
These replacement parts support the maintenance and repair of tube flaring and swaging tools.
| Loading... | ||||