High-Visibility Vests
Available564 products
High-visibility vests are made of brightly colored fabric or have reflective materials to make workers and pedestrians more visible to traffic and equipment operators. ANSI class indicates the amount of high-visibility fabric and reflective tape on the garment, as well as width of the reflective tape. Non-rated and Class 2 safety vests have lower levels of visibility than higher numbers. They are worn when required by OSHA or when working in warehouses, near traffic, and on construction sites.
Non-ANSI Rated U-Back Vests
U-back is the most common pattern and has two vertical stripes and at least one horizontal stripe on the back of the vest. Non-ANSI rated vests are used to identify workers in off-road settings such as warehouses and manufacturing facilities when ANSI compliance is not required.
Mesh Polyester
| Loading... | ||||||||
Solid Polyester
| Loading... | ||||||||
Non-ANSI Rated X-Back Vests
X-back garments indicate when a worker is facing away and cannot see signals or oncoming traffic. Non-ANSI rated vests are used to identify workers in off-road settings such as warehouses and manufacturing facilities when ANSI compliance is not required.
Mesh Polyester
| Loading... | ||||||||
Non-ANSI Rated Vertical-Stripe Back Vests
Vertical stripe vests have two parallel stripes down the front and back of the vest. Non-ANSI rated vests are used to identify workers in off-road settings such as warehouses and manufacturing facilities when ANSI compliance is not required.
Mesh Polyester
| Loading... | ||||||||
Non-ANSI Rated Vertical-Stripe Back Breakaway Vests
Breakaway points release to pull the vest off the worker when caught in machinery or an obstruction. Vertical stripe vests have two parallel stripes down the front and back of the vest. Non-ANSI rated vests are used to identify workers in off-road settings such as warehouses and manufacturing facilities when ANSI compliance is not required.
Mesh Polyester
| Loading... | |||||||||
Non-ANSI Rated Plain-Back Vests
Plain back vests do not have reflective stripes. Non-ANSI rated vests are used to identify workers in off-road settings such as warehouses and manufacturing facilities when ANSI compliance is not required.
Mesh Polyester
| Loading... | ||||||||
Non-ANSI Rated X-Back Vests with D-Ring Slot for Fall Protection
These fall harness compatible vests have a slot on the back to pass through the harness D-ring so it can safely connect to a lanyard or self-retracting lifeline. X-back garments indicate when a worker is facing away and cannot see signals or oncoming traffic. Non-ANSI rated vests are used to identify workers in off-road settings such as warehouses and manufacturing facilities when ANSI compliance is not required.
Solid Polyester
| Loading... | |||||||||
Class 2 U-Back Vests
Class 2 garments meet Type R requirements for use on roadways. Class 2 is the most commonly used class and is suitable for use on construction sites and railways, or by airport groundcrews and crossing guards. U-back is the most common pattern and has two vertical stripes and at least one horizontal stripe on the back of the vest.
Mesh Cotton
| Loading... | ||||||||
Mesh Modacrylic
| Loading... | ||||||||
Mesh Polyester
| Loading... | ||||||||
Solid Front/Mesh Back Polyester
| Loading... | ||||||||
Solid Front:Solid Polyester, Back:Mesh Polyester
| Loading... | ||||||||
Solid Polyester
| Loading... | ||||||||
Class 2 U-Back Women's Vests
Class 2 garments meet Type R requirements for use on roadways. Class 2 is the most commonly used class and is suitable for use on construction sites and railways, or by airport groundcrews and crossing guards. U-back is the most common pattern and has two vertical stripes and at least one horizontal stripe on the back of the vest.
Mesh Polyester
| Loading... | ||||||||
Solid Polyester
| Loading... | ||||||||
Class 2 U-Back Surveyor's Vests
Surveyors' vests have more features than standard vests, such as added pockets or gromments for threading marking tape. Class 2 garments meet Type R requirements for use on roadways. Class 2 is the most commonly used class and is suitable for use on construction sites and railways, or by airport groundcrews and crossing guards. U-back is the most common pattern and has two vertical stripes and at least one horizontal stripe on the back of the vest.
Mesh Polyester
| Loading... | ||||||||
Solid Front/Mesh Back Polyester
| Loading... | ||||||||
Class 2 U-Back Breakaway Vests
Breakaway points release to pull the vest off the worker when caught in machinery or an obstruction. Class 2 garments meet Type R requirements for use on roadways. Class 2 is the most commonly used class and is suitable for use on construction sites and railways, or by airport groundcrews and crossing guards. U-back is the most common pattern and has two vertical stripes and at least one horizontal stripe on the back of the vest.
Mesh Polyester
| Loading... | |||||||||
Solid Polyester
| Loading... | |||||||||
Class 2 U-Back Vests with D-Ring Slot for Fall Protection
A slot on the back of these vests is positioned to pass through a D-ring on a fall protection harness to connect a lanyard or self-retracting lifeline. Class 2 garments meet Type R requirements for use on roadways. Class 2 is the most commonly used class and is suitable for use on construction sites and railways, or by airport groundcrews and crossing guards. U-back is the most common pattern and has two vertical stripes and at least one horizontal stripe on the back of the vest.
Mesh Polyester
| Loading... | |||||||||
Solid Polyester
| Loading... | |||||||||
Class 2 U-Back Surveyor's Vests with D-Ring Slot for Fall Protection
Surveyors' vests have more features than standard vests, such as added pockets or gromments for threading marking tape. A slot on the back of these vests is positioned to pass through a D-ring on a fall protection harness to connect a lanyard or self-retracting lifeline. Class 2 garments meet Type R requirements for use on roadways. Class 2 is the most commonly used class and is suitable for use on construction sites and railways, or by airport groundcrews and crossing guards. U-back is the most common pattern and has two vertical stripes and at least one horizontal stripe on the back of the vest.
Mesh Polyester
| Loading... | |||||||||
Class 2 U-Back Breakaway Vests with D-Ring Slot for Fall Protection
Breakaway points release to pull the vest off the worker when caught in machinery or an obstruction. A slot on the back of these vests is positioned to pass through a D-ring on a fall protection harness to connect a lanyard or self-retracting lifeline. Class 2 garments meet Type R requirements for use on roadways. Class 2 is the most commonly used class and is suitable for use on construction sites and railways, or by airport groundcrews and crossing guards. U-back is the most common pattern and has two vertical stripes and at least one horizontal stripe on the back of the vest.
Mesh Polyester
| Loading... | |||||||||
Class 2 Arc Flash & Flame-Resistant U-Back Vests
Arc flash-protective garments meet NFPA 70E standards to protect workers from arc flash burns. Class 2 garments meet Type R requirements for use on roadways. Class 2 is the most commonly used class and is suitable for use on construction sites and railways, or by airport groundcrews and crossing guards. U-back is the most common pattern and has two vertical stripes and at least one horizontal stripe on the back of the vest.
Solid Modacrylic
| Loading... | ||||||||||
Class 2 X-Back Vests
Class 2 garments meet Type R requirements for use on roadways. Class 2 is the most commonly used class and is suitable for use on construction sites and railways, or by airport groundcrews and crossing guards. X-back garments indicate when a worker is facing away and cannot see signals or oncoming traffic.
Mesh Polyester
| Loading... | ||||||||
Class 2 X-Back Breakaway Vests
Breakaway points release to pull the vest off the worker when caught in machinery or an obstruction. Class 2 garments meet Type R requirements for use on roadways. Class 2 is the most commonly used class and is suitable for use on construction sites and railways, or by airport groundcrews and crossing guards. X-back garments indicate when a worker is facing away and cannot see signals or oncoming traffic.
Mesh Polyester
| Loading... | |||||||||
Class 2 X-Back Vests with D-Ring Slot for Fall Protection
A slot on the back of these vests is positioned to pass through a D-ring on a fall protection harness to connect a lanyard or self-retracting lifeline. Class 2 garments meet Type R requirements for use on roadways. Class 2 is the most commonly used class and is suitable for use on construction sites and railways, or by airport groundcrews and crossing guards. X-back garments indicate when a worker is facing away and cannot see signals or oncoming traffic.
Solid Polyester
| Loading... | |||||||||
Class 2 X-Back Breakaway Vests with D-Ring Slot for Fall Protection
Breakaway points release to pull the vest off the worker when caught in machinery or an obstruction. A slot on the back of these vests is positioned to pass through a D-ring on a fall protection harness to connect a lanyard or self-retracting lifeline. Class 2 garments meet Type R requirements for use on roadways. Class 2 is the most commonly used class and is suitable for use on construction sites and railways, or by airport groundcrews and crossing guards. X-back garments indicate when a worker is facing away and cannot see signals or oncoming traffic.
Mesh Polyester
| Loading... | ||||||||||
Class 3 U-Back Vests
Class 3 garments meet Type R requirements for use on roadways. They have sleeves with reflective tape and makes them more visible than Class 2. They are worn when working near fast-moving traffic, at night, or to provide improved contrast when working against complex backgrounds. U-back is the most common pattern and has two vertical stripes and at least one horizontal stripe on the back of the vest.
Mesh Polyester
| Loading... | ||||||||
Solid Polyester
| Loading... | ||||||||
Class 3 U-Back Vests with D-Ring Slot for Fall Protection
A slot on the back of these vests is positioned to pass through a D-ring on a fall protection harness to connect a lanyard or self-retracting lifeline. Class 3 garments meet Type R requirements for use on roadways. They have sleeves with reflective tape and makes them more visible than Class 2. They are worn when working near fast-moving traffic, at night, or to provide improved contrast when working against complex backgrounds. U-back is the most common pattern and has two vertical stripes and at least one horizontal stripe on the back of the vest.
Mesh Polyester
| Loading... | |||||||||
Solid Polyester
| Loading... | |||||||||
Class 3 Arc Flash & Flame-Resistant U-Back Vests with D-Ring Slot for Fall Protection
Arc flash-protective garments meet NFPA 70E standards to protect workers from arc flash burns. A slot on the back of these vests is positioned to pass through a D-ring on a fall protection harness to connect a lanyard or self-retracting lifeline. Class 3 garments meet Type R requirements for use on roadways. They have sleeves with reflective tape and makes them more visible than Class 2. They are worn when working near fast-moving traffic, at night, or to provide improved contrast when working against complex backgrounds. U-back is the most common pattern and has two vertical stripes and at least one horizontal stripe on the back of the vest.
Mesh Polyester
| Loading... | |||||||||||
Solid Polyester
| Loading... | |||||||||||
Class 2 Arc Flash & Flame-Resistant U-Back Vests with D-Ring Slot for Fall Protection
Arc flash-protective garments meet NFPA 70E standards to protect workers from arc flash burns. A slot on the back of these vests is positioned to pass through a D-ring on a fall protection harness to connect a lanyard or self-retracting lifeline. Class 2 is the most commonly used class and is suitable for use on construction sites and railways, or by airport groundcrews and crossing guards. They are worn when working near fast-moving traffic, at night, or to provide improved contrast when working against complex backgrounds. U-back is the most common pattern and has two vertical stripes and at least one horizontal stripe on the back of the vest.
Mesh Polyester
| Loading... | |||||||||||
Solid Polyester
| Loading... | |||||||||||
Class 2 Arc Flash & Flame-Resistant X-Back Breakaway Vests with D-Ring Slot for Fall Protection
Arc flash-protective garments meet NFPA 70E standards to protect workers from arc flash burns. A slot on the back of these vests is positioned to pass through a D-ring on a fall protection harness to connect a lanyard or self-retracting lifeline. Breakaway points release to pull the vest off the worker when caught in machinery or an obstruction. Class 2 is the most commonly used class and is suitable for use on construction sites and railways, or by airport groundcrews and crossing guards. They are worn when working near fast-moving traffic, at night, or to provide improved contrast when working against complex backgrounds. X-back garments indicate when a worker is facing away and cannot see signals or oncoming traffic.
Mesh Polyester
| Loading... | |||||||||||
Solid Polyester
| Loading... | |||||||||||
Class 3 Arc Flash & Flame-Resistant X-Back Breakaway Vests with D-Ring Slot for Fall Protection
Arc flash-protective garments meet NFPA 70E standards to protect workers from arc flash burns. A slot on the back of these vests is positioned to pass through a D-ring on a fall protection harness to connect a lanyard or self-retracting lifeline. Breakaway points release to pull the vest off the worker when caught in machinery or an obstruction. Class 3 garments meet Type R requirements for use on roadways. They have sleeves with reflective tape and makes them more visible than Class 2. They are worn when working near fast-moving traffic, at night, or to provide improved contrast when working against complex backgrounds. X-back garments indicate when a worker is facing away and cannot see signals or oncoming traffic.
Mesh Polyester
| Loading... | |||||||||||
Solid Polyester
| Loading... | |||||||||||