Navigation Menu New

Access My Account, Order History, Lists and more here.

Cart
All Products
Bulk Order
Cart

High-Visibility Vests

Available106 products

High-visibility vests are made of brightly colored fabric or have reflective materials to make workers and pedestrians more visible to traffic and equipment operators. ANSI class indicates the amount of high-visibility fabric and reflective tape on the garment, as well as width of the reflective tape. Non-rated and Class 2 safety vests have lower levels of visibility than higher numbers. They are worn when required by OSHA or when working in warehouses, near traffic, and on construction sites.

ANSI Class

Class 3 U-Back Vests

Class 3 U-Back Vests
Class 3 garments meet Type R requirements for use on roadways. They have sleeves with reflective tape and makes them more visible than Class 2. They are worn when working near fast-moving traffic, at night, or to provide improved contrast when working against complex backgrounds. U-back is the most common pattern and has two vertical stripes and at least one horizontal stripe on the back of the vest.

Mesh Polyester

Loading...

Solid Polyester

Loading...

Class 3 U-Back Vests with D-Ring Slot for Fall Protection

Class 3 U-Back Vests with D-Ring Slot for Fall Protection
A slot on the back of these vests is positioned to pass through a D-ring on a fall protection harness to connect a lanyard or self-retracting lifeline. Class 3 garments meet Type R requirements for use on roadways. They have sleeves with reflective tape and makes them more visible than Class 2. They are worn when working near fast-moving traffic, at night, or to provide improved contrast when working against complex backgrounds. U-back is the most common pattern and has two vertical stripes and at least one horizontal stripe on the back of the vest.

Mesh Polyester

Loading...

Solid Polyester

Loading...

Class 3 Arc Flash & Flame-Resistant U-Back Vests with D-Ring Slot for Fall Protection

Class 3 Arc Flash & Flame-Resistant U-Back Vests with D-Ring Slot for Fall Protection
Arc flash-protective garments meet NFPA 70E standards to protect workers from arc flash burns. A slot on the back of these vests is positioned to pass through a D-ring on a fall protection harness to connect a lanyard or self-retracting lifeline. Class 3 garments meet Type R requirements for use on roadways. They have sleeves with reflective tape and makes them more visible than Class 2. They are worn when working near fast-moving traffic, at night, or to provide improved contrast when working against complex backgrounds. U-back is the most common pattern and has two vertical stripes and at least one horizontal stripe on the back of the vest.

Mesh Polyester

Loading...

Solid Polyester

Loading...

Class 3 Arc Flash & Flame-Resistant X-Back Breakaway Vests with D-Ring Slot for Fall Protection

Class 3 Arc Flash & Flame-Resistant X-Back Breakaway Vests with D-Ring Slot for Fall Protection
Arc flash-protective garments meet NFPA 70E standards to protect workers from arc flash burns. A slot on the back of these vests is positioned to pass through a D-ring on a fall protection harness to connect a lanyard or self-retracting lifeline. Breakaway points release to pull the vest off the worker when caught in machinery or an obstruction. Class 3 garments meet Type R requirements for use on roadways. They have sleeves with reflective tape and makes them more visible than Class 2. They are worn when working near fast-moving traffic, at night, or to provide improved contrast when working against complex backgrounds. X-back garments indicate when a worker is facing away and cannot see signals or oncoming traffic.

Mesh Polyester

Loading...

Solid Polyester

Loading...
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order.