These pitless adapters allow well water pipes to be installed deep enough in the ground to avoid freezing in cold weather. The adapter is attached to a well’s drop pipe 6 to 7 ft. underground and it has a 90° angle so it can be connected to a water pipe that goes horizontally away from the well.

These torque arrestors hold submersible deep-well pumps in place inside the well casing and prevent damage from the torque produced by the pump motor and the impellers. Torque arrestors connect around the drop pipe and above the submersible-well pump, then they are clamped down on both ends with the expandable section opened slightly wider than the diameter of the well casing. They keep pumps from twisting and keep them centered in the well casing so the pumps will not slam against the side of the casing and damage it.