Aeroquip FC500 X-Flex bulk hydraulic hoses are used in low-temperature hydraulics applications with petroleum- and water-based fluids. The hoses have a synthetic rubber tube and abrasion-resistant cover, and they are reinforced with either four heavy spiral wires (for hoses with an ID of between 0.75" and 1.50") or six heavy spiral wires (for hoses with a 2.00" ID). They are stronger and can withstand more pressure than hoses that are reinforced with fewer wires. Aeroquip FC500 hydraulic hoses are compatible with Aeroquip spiral TTC crimpable fittings.

Aeroquip FC619 bulk hydraulic hoses are used in hydraulic applications for suction and transfer of petroleum hydraulic fluids, fuel, lubricating oils, gasoline, water, and other industrial fluids. They have a 1/2 SAE bend radius, which reduces the amount of force needed to flex the hose and can help reduce the effort required to install the hose. The hoses' tube and cover are made from synthetic rubber, and the hose is reinforced with a helical wire inserted between two textile reinforcement layers. Aeroquip FC619 hydraulic hoses are compatible with Aeroquip OTC and TTC crimpable fittings or Aeroquip reusable fittings.

Aeroquip GH195 Hi-Impulse MatchMate Blue bulk hydraulic hoses with double-wire braid reinforcement are used in hydraulic applications with petroleum-based and fire-resistant hydraulic fluids, fuel, and lubricating fluids. These hoses have an elastomer tube and cover, and they are reinforced with two wire braids. They are stronger and can withstand more pressure than hoses that are reinforced with one wire. Aeroquip GH195 hydraulic hoses are compatible with Aeroquip TTC crimpable fittings.

Aeroquip GH493 MatchMate bulk hydraulic hoses are used in hydraulics and general purpose industrial applications with petroleum- and water-based fluids. They have a 1/2 SAE bend radius, which reduces the amount of force needed to flex the hose and can help reduce the effort required to install the hose. The hoses' tube and cover are made from synthetic rubber, and the hoses are reinforced with four spiral wires. They are stronger and can withstand more pressure than hoses that are reinforced with fewer wires, but they have limited to no flexibility. Aeroquip GH493 hydraulic hoses are compatible with Aeroquip reusable fittings and Aeroquip TTC12, single-skive, or internal-skive (on certain hose sizes) crimpable fittings.

Aeroquip GH781 MatchMate bulk hydraulic hoses are used in hydraulics and general purpose industrial applications with petroleum- and water-based fluids. The hoses have a synthetic rubber tube and abrasion-resistant cover, and they are reinforced with two wire braids. They are stronger and can withstand more pressure than hoses that are reinforced with one wire braid. These hoses meet or exceed EN requirements at 1/2 SAE bend radius. Aeroquip GH781 hydraulic hoses are compatible with Aeroquip TTC crimpable fittings.

Aeroquip GH793 MatchMate bulk hydraulic hoses are used in hydraulics and general purpose industrial applications with petroleum- and water-based fluids. The hoses have a synthetic rubber tube and abrasion-resistant cover, and they are reinforced with two wire braids. They are stronger and can withstand more pressure than hoses that are reinforced with one wire braid. These hoses can be used with reusable hose fittings. Aeroquip GH793 hydraulic hoses are compatible with Aeroquip TTC crimpable fittings or Aeroquip reusable fittings.

Weatherhead H280 WeatherShield bulk hydraulic hoses are used for general purpose industrial and hydraulic applications with medium- to high-pressure transfer of petroleum- and water-based hydraulic fluids. The hoses have a synthetic rubber tube and abrasion-resistant synthetic rubber cover. They are reinforced with two steel braids. They are stronger and can withstand more pressure than hoses that are reinforced with one steel braid. Weatherhead H280 hydraulic hoses are compatible with Weatherhead Z series crimpable fittings.

Weatherhead H430 WeatherShield bulk hydraulic hoses are designed for very high-pressure transfer of hydraulic and water-based fluids. They can withstand pressure surges and flexing. These hoses are used in construction, mining, farming, and high-performance industrial equipment. The hoses have a synthetic rubber tube and an abrasion-resistant synthetic rubber cover. They are reinforced with four spiral wires. They are stronger and can withstand more pressure than hoses that are reinforced with fewer wires. Weatherhead H430 hydraulic hoses are compatible with Weatherhead 4S series crimpable fittings.