Aeroquip FC300 bulk hydraulic hoses resist high temperatures and abrasion. They are used in hydraulic applications with petroleum-based fluids, air, gasoline, fuel, lubricating oils, fire-resistant hydraulic fluids, and other industrial fluids. The hoses have an elastomer tube and a polyester braided cover. They are reinforced with a single wire braid. Aeroquip FC300 hydraulic hoses are compatible with Aeroquip 100R5 crimpable fittings or Aeroquip reusable fittings.

Aeroquip FC332 bulk hydraulic hoses are suitable for low-pressure hydraulic applications with gasoline, fuel, lubricating oils, air, and water. They are not suitable for hydraulic-impulse applications or air-brake applications. These hoses have an elastomer tube and cover with textile braid reinforcement. Aeroquip FC332 hydraulic hoses are compatible with Aeroquip socketless reusable fittings.

Aeroquip FC500 X-Flex bulk hydraulic hoses are used in low-temperature hydraulics applications with petroleum- and water-based fluids. The hoses have a synthetic rubber tube and abrasion-resistant cover, and they are reinforced with either four heavy spiral wires (for hoses with an ID of between 0.75" and 1.50") or six heavy spiral wires (for hoses with a 2.00" ID). They are stronger and can withstand more pressure than hoses that are reinforced with fewer wires. Aeroquip FC500 hydraulic hoses are compatible with Aeroquip spiral TTC crimpable fittings.

Aeroquip GH195 Hi-Impulse MatchMate Blue bulk hydraulic hoses with double-wire braid reinforcement are used in hydraulic applications with petroleum-based and fire-resistant hydraulic fluids, fuel, and lubricating fluids. These hoses have an elastomer tube and cover, and they are reinforced with two wire braids. They are stronger and can withstand more pressure than hoses that are reinforced with one wire. Aeroquip GH195 hydraulic hoses are compatible with Aeroquip TTC crimpable fittings.

Aeroquip GH493 MatchMate bulk hydraulic hoses are used in hydraulics and general purpose industrial applications with petroleum- and water-based fluids. They have a 1/2 SAE bend radius, which reduces the amount of force needed to flex the hose and can help reduce the effort required to install the hose. The hoses' tube and cover are made from synthetic rubber, and the hoses are reinforced with four spiral wires. They are stronger and can withstand more pressure than hoses that are reinforced with fewer wires, but they have limited to no flexibility. Aeroquip GH493 hydraulic hoses are compatible with Aeroquip reusable fittings and Aeroquip TTC12, single-skive, or internal-skive (on certain hose sizes) crimpable fittings.

Aeroquip GH681 constant-pressure bulk hydraulic hoses are used in hydraulics and general purpose industrial applications with petroleum- and water-based fluids. They are suitable for applications where the pressure is constant and does not pulse or change with temperature changes. The hoses' tube and cover are made from synthetic rubber, and the hoses are reinforced with a single wire braid. Aeroquip GH681 hydraulic hoses are compatible with Aeroquip TTC crimpable fittings.

Aeroquip GH781 MatchMate bulk hydraulic hoses are used in hydraulics and general purpose industrial applications with petroleum- and water-based fluids. The hoses have a synthetic rubber tube and abrasion-resistant cover, and they are reinforced with two wire braids. They are stronger and can withstand more pressure than hoses that are reinforced with one wire braid. These hoses meet or exceed EN requirements at 1/2 SAE bend radius. Aeroquip GH781 hydraulic hoses are compatible with Aeroquip TTC crimpable fittings.

Aeroquip GH793 MatchMate bulk hydraulic hoses are used in hydraulics and general purpose industrial applications with petroleum- and water-based fluids. The hoses have a synthetic rubber tube and abrasion-resistant cover, and they are reinforced with two wire braids. They are stronger and can withstand more pressure than hoses that are reinforced with one wire braid. These hoses can be used with reusable hose fittings. Aeroquip GH793 hydraulic hoses are compatible with Aeroquip TTC crimpable fittings or Aeroquip reusable fittings.

These FC254 bulk hydraulic hoses are used in general purpose industrial and hydraulic applications with petroleum- and water-based fluids. Their tubes are made from synthetic rubber and they are reinforced with four heavy spiral wires. They are stronger and can withstand more pressure than hoses that are reinforced with fewer wires, but they have limited to no flexibility. These hydraulic hoses are compatible with Aeroquip spiral TTC, single-skive, or internal-skive crimpable fittings.

Weatherhead H039 bulk hydraulic hoses are designed for hydraulic suction applications. The hoses' tube is made from CPE (chlorinated polyethylene), and they have a neoprene cover. They are reinforced with one helical cable wire between two textile layers and one fiber braid. Weatherhead H039 hydraulic hoses are compatible with Weatherhead Z series crimpable fittings.

Weatherhead H069 general purpose bulk truck and hydraulic hoses are used in fuel and grease lines and medium-pressure hydraulic applications. They are suitable for use with high-temperature petroleum oils. Hoses with an ID of 0.62" or less can be used for air-brake applications. The hoses have a nitrile tube and a fiber braid cover. They are reinforced with one fiber braid and one steel braid. Weatherhead H069 hydraulic hoses are compatible with Weatherhead E series crimpable fittings or Weatherhead D series or N series field-attachable fittings.