Class X Go (Plus) Pin Gauges

Available9,961 products

Class X Go (Plus) pin gauges are unthreaded, smooth rods of tool steel used to perform Go plus tolerance tests on bores. They are also used to calibrate measuring equipment. These gauges are 2" long meet the specifications set by the National Institute of Standards and Technology (NIST).

Class X Go (Plus) Pin Gauges - 0.0040 in to 0.0750 in

Class X Go (Plus) Pin Gauges - 0.0040 in to 0.0750 in
Class X Go (Plus) plug and pin gauges are used to perform Go/No-Go tolerance tests on bores and holes. They are also used to calibrate equipment and to gauge parts directly. These gauges come with a short-form certificate of accuracy traceable to NIST that confirms they are within specs. This table contains gauges up to 0.0750 in diameter.

Diameter Range: 0.0040 in to 0.0250 in

Loading...

Diameter Range: 0.0251 in to 0.0750 in

Loading...

Class X Go (Plus) Pin Gauges - 0.0751 in to 0.2810 in

Class X Go (Plus) Pin Gauges - 0.0751 in to 0.2810 in
Class X Go (Plus) plug and pin gauges are used to perform Go/No-Go tolerance tests on bores and holes. They are also used to calibrate equipment and to gauge parts directly. These gauges come with a short-form certificate of accuracy traceable to NIST that confirms they are within specs. This table contains gauges from 0.0751 in to 0.2810 in diameter.

Diameter Range: 0.0751 in to 0.2810 in

Loading...

Class X Go (Plus) Pin Gauges - 0.2811 in to 0.4060 in

Class X Go (Plus) Pin Gauges - 0.2811 in to 0.4060 in
Class X Go (Plus) plug and pin gauges are used to perform Go/No-Go tolerance tests on bores and holes. They are also used to calibrate equipment and to gauge parts directly. These gauges come with a short-form certificate of accuracy traceable to NIST that confirms they are within specs. This table contains gauges from 0.2811 in to 0.4060 in diameter.

Diameter Range: 0.2811 in to 0.4060 in

Loading...

Class X Go (Plus) Pin Gauges - 0.4061 in to 0.5100 in

Class X Go (Plus) Pin Gauges - 0.4061 in to 0.5100 in
Class X Go (Plus) plug and pin gauges are used to perform Go/No-Go tolerance tests on bores and holes. They are also used to calibrate equipment and to gauge parts directly. These gauges come with a short-form certificate of accuracy traceable to NIST that confirms they are within specs. This table contains gauges from 0.4061 in to 0.5100 in diameter.

Diameter Range: 0.4061 in to 0.5100 in

Loading...

Class X Go (Plus) Pin Gauges - 0.5101 in to 0.6350 in

Class X Go (Plus) Pin Gauges - 0.5101 in to 0.6350 in
Class X Go (Plus) plug and pin gauges are used to perform Go/No-Go tolerance tests on bores and holes. They are also used to calibrate equipment and to gauge parts directly. These gauges come with a short-form certificate of accuracy traceable to NIST that confirms they are within specs. This table contains gauges from 0.5101 in to 0.6350 in diameter.

Diameter Range: 0.5101 in to 0.6350 in

Loading...

Class X Go (Plus) Pin Gauges - 0.6351 in to 0.7600 in

Class X Go (Plus) Pin Gauges - 0.6351 in to 0.7600 in
Class X Go (Plus) plug and pin gauges are used to perform Go/No-Go tolerance tests on bores and holes. They are also used to calibrate equipment and to gauge parts directly. These gauges come with a short-form certificate of accuracy traceable to NIST that confirms they are within specs. This table contains gauges from 0.6351 in to 0.7600 in diameter.

Diameter Range: 0.6351 in to 0.7600 in

Loading...

Class X Go (Plus) Pin Gauges - 0.7601 in to 1.0000 in

Class X Go (Plus) Pin Gauges - 0.7601 in to 1.0000 in
Class X Go (Plus) plug and pin gauges are used to perform Go/No-Go tolerance tests on bores and holes. They are also used to calibrate equipment and to gauge parts directly. These gauges come with a short-form certificate of accuracy traceable to NIST that confirms they are within specs. This table contains gauges larger than 0.7601 in diameter.

Diameter Range: 0.7601 in to 1.0000 in

Loading...
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order.
Back to Top