Hand Reamers

Available86 products
Hand reamers enlarge or finish an existing hole in a metal workpiece to a desired size. The reamer is held with a tap wrench, adjustable wrench, or vise and slowly rotated to feed it into the hole during metalworking tasks. Hand reamers don't need to be installed in a machine, so they require less setup time than chucking reamers. Each of these manual reamers is designed for use with a specific size of hole.

High-Speed Steel Straight-Flute Hand Reamers

High-Speed Steel Straight-Flute Hand Reamers
Straight-flute hand reamers push chips forward into a hole as they enlarge or finish it to a desired size. They are recommended for reaming through holes and are the most commonly used style of reamer. Each reamer is designed for use with a specific size of hole. The reamer is held with a tap wrench, adjustable wrench, or vise and slowly rotated to feed it into the hole.

Fractional Inch + Straight Shank

Loading...

High-Speed Steel Left-Hand Spiral-Flute Hand Reamers

High-Speed Steel Left-Hand Spiral-Flute Hand Reamers

Left-hand spiral-flute hand reamers thrust material chips into and through a hole as they ream a workpiece. They provide a more finished cut than straight-flute hand reamers. Reamers are held by tools such as a tap wrench to slowly rotate and feed it into the hole. The reamer is designed for use with a specific size of hole, and the spiral flutes reduce the amount of effort required to turn the reamer.

Fractional Inch + Straight Shank

Loading...
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order.
Back to Top