Dry Lubricants
Available64 products
Dry lubricants reduce friction between moving parts without liquid. These substances, also known as solid lubricants, coat surfaces of rollers, gears, chains, and gaskets with a dry film or powder that helps reduce wear and tear on mechanical equipment. Dry lubricants are a good choice for dusty environments because they resist grime. Dirt and dust don't stick to the dry lubricant and create grime or wet residue on equipment. Dry lubricants withstand high heat and won't break down to a residue that drips.
General Purpose Dry Lubricants
General purpose dry lubricants reduce friction between moving parts with a powdery coating. These substances lubricate parts such as rollers, gears, and chains without a fluid. They can withstand high temperatures and won't break down and drip. They resist dust and dirt and prevent grime from building up on equipment.
3-IN-ONE
| Loading... | ||||||
Anti-Seize Technology
| Loading... | ||||||
Blaster
| Loading... | ||||||
CRC
| Loading... | ||||||
Jet-Lube
| Loading... | ||||||
LPS
| Loading... | ||||||
Liquid Wrench
| Loading... | ||||||
Loctite
| Loading... | ||||||
Renewable Lubricants
| Loading... | ||||||
SLIP Plate
| Loading... | ||||||
Seed Slik
| Loading... | ||||||
Sprayon
| Loading... | ||||||
Super Lube
| Loading... | ||||||
WD-40 Specialist
| Loading... | ||||||
Zep
| Loading... | ||||||
Chain & Wire Rope Dry Lubricants
Chain and wire rope dry lubricants prevent damage by reducing the friction between the chain or rope as it engages with the equipment. The lubricant penetrates wire rope and the pins and bushings within a chain, leaving a dry film behind to prevent dust or dirt from sticking.
Anti-Seize Technology
| Loading... | ||||||
Blaster
| Loading... | ||||||
CRC
| Loading... | ||||||
Crosby
| Loading... | ||||||
SLIP Plate
| Loading... | ||||||
Garage Door Dry Lubricants
Garage door dry lubricants reduce friction and wear on garage doors, dock and trailer doors, overhead doors, and other roll-up assemblies. They lubricate hinges, bearings, pulleys, and tracks with solid powder substances to improve sliding motion and reduce squeaking. These lubricants leave a dry film that protects rolling door mechanisms against water damage or corrosion.
3-IN-ONE
| Loading... | ||||||
Blaster
| Loading... | ||||||
Lock Dry Lubricants
Lock dry lubricants loosen frozen or corroded lock mechanisms. These powdery, solid substances penetrate quickly into stuck or frozen locks to release them, and they provide protection against further corrosion. They don't attract dust or dirt and won't create grime or leave wet residue in the lock.
3-IN-ONE
| Loading... | ||||||
Electrical Dry Lubricants
Electrical dry lubricants protect electronic components from corrosion or moisture damage. They coat electronics with a dry film that resists and repels moisture. They can be applied to nonenergized equipment in wet or harsh environments for waterproofing. They should not be applied to energized equipment.
CRC
| Loading... | ||||||