H Series Timing Belt Pulleys
Available149 products
H series timing belt pulleys have a medium-large 0.5 inch pitch. They are for use in positioning and conveying applications. They are compatible with H series 0.5" pitch timing belts.
Plain Bore Timing Pulleys with Hub
H series plain-bore timing pulleys have a starting bore, or center hole, that can be machined to the correct size of the shaft. Keyways and/or set screws can be machined to fit the needs of the shaft and application.
For 1 in Wide Belts
| Loading... | ||||||||||
For 1-1/2 in Wide Belts
| Loading... | ||||||||||
For 2 in Wide Belts
| Loading... | ||||||||||
For 3 in Wide Belts
| Loading... | ||||||||||
QD Bushed Timing Pulleys
These H series timing pulleys require a QD (quick detachable) bushing to mount to the drive shaft and adapt the bore, or center hole, to the shaft size.
For 1 in Wide Belts
| Loading... | ||||||||
For 1-1/2 in Wide Belts
| Loading... | ||||||||
For 2 in Wide Belts
| Loading... | ||||||||
For 3 in Wide Belts
| Loading... | ||||||||
Split Taper Bushed Timing Pulleys
These H series timing pulleys require a split taper bushing to mount to the drive shaft and adapt the bore, or center hole, to the shaft size.
For 1 in Wide Belts
| Loading... | |||||||||